How Does It Work?
The ImageHolders System is comprised of remarkably simple components that, when combined, produce amazing display systems. Our line of products covers wall mounted, suspended and floor standing items. The basic parts consist of bases and support arms in both straight and wave profiles. This page will take you through all the parts and will explain how the wall, floor and suspended display systems work. Here are the basic pieces:

base

Straight Profile

Wave Profile
Support Arms:
Our support arms come in a variety of lengths and in wave or straight profile and provide the primary design element to the ImageHolders product line. These supports give the system its distinct look and extensive versatility.
Each support consists of groves down each side, which can hold graphics or brackets for literature dispensers or shelving. When graphics are inserted into the wave supports, the graphics take the shape of the display. Additionally, two concealed holes at either end are designed for either an end cap or pins for lengthening your display.

Removable end cap

2mm thick graphics (left) or graphics with retaining strip (right)

Shelf and literature dispenser clamps

Connecting profiles
Bases
For our floor standing display systems, each base has a channel through the middle. The support arms designed for floor standing displays have a foot that is shaped to fit into the channel and hold the support upright. To insert the supports the end caps are removable. Once positioned, two screws hold the supports tight into place.

Base with end cap

Base profile

Base channel for support arms

Connecting bases
Graphics
Graphics can be printed and mounted with a maximum thickness of up to 2mm (0.08″). Recommended substrates; up to .05mm (0.00″) flexible material with ImageHolders retaining strip or graphics mounted onto 1mm (0.04″) foamex / PVC board. Supplied with top bar for optional use - deduct 20mm (0.79″) from graphic height if top bar not used. To install graphics simply slide the graphic or retaining strip into the groove. Another graphics option is our ImageLight illuminated panels. These 1mm thin panels are brilliantly lit and the flexible material fits into the graphics grooves of both our straight and curved supports. The illuminated panels can be programmed to flash, dim or fade as well. Read more about our illuminated panel technology here. When your graphics are inserted, finish the end with an end cap or a top bar for a polished look.

2mm thick graphics (left) or graphics with retaining strip (right)

Suspended supports with curved graphic

Screen stand with curved graphic (screen not yet installed)

Wall display with illuminated ImageLight panel
Floor standing
Our floor standing items are all built off one or more of our sturdy aluminium bases. The end caps are removable to expose access to a centre channel. This channel can hold a variety of support arms in straight or wave formats and in a selection of heights. These support arms can hold graphics, shelves, literature dispensers, plasma screens, projection screens or audio equipment. The displays below all use the same base and supports but are configured with different accessories

With Graphic and Literature Dispensers

With Plasma Screen and Literature Dispensers

With Graphic and Tempered Glass Shelves

With Full Length Graphic
Wall Mount
Within this series there are various profiles, curved and straight, that can be mounted to the wall. From here, you can attach graphics, literature dispensers or shelves. Each segment of the profile has the ability to link to additional segments, in order to create lengthy and custom sized displays. Profiles can be mounted in a landscape or portrait format. Additionally units can be stacked to create horizontally running bands of graphics. The displays below all use the same support arms but are configured with various accessories or in multiple units.

With Single Graphic

With Literature Dispensers

With Side-by-Side Graphics

With Graphic and Literature Dispensers
Audio Visual
For screen stands we include VESA (Video Equipment Standards Association) brackets that allow for mounting of most screens. All cables are easily hidden inside the length of the hollow support pillar to keep from being seen. Under the base you can upgrade each piece to include a drawer, which can house your laptop, dvd player or other slim media items. Casters are also available for added mobility. Click here for more information about our AV displays and screen stands.

AV Sliding Clamp

VESA detail

Base Drawer

Lockable Casters
Suspended Signs
These signs were designed to be hung from ceilings and thus had to be designed to be lightweight. Several of our banner rails were designed to hold lightweight fabric or vinyl.

suspended signs

Suspended Signs






